STARBIRD

A twin-engine 3D printed model of an airplane with a large margin of thrust.

The maximum tested take-off weight for manual launch,
in the recommended configuration (3008 1150 kV 8040-3),
is more than 4 kilograms (molicel 6s5p21700 batteries).

The total estimated weight of the model without a battery is ~ 1800 g.

Two engines and a large wing area ensure an easy and safe launch of the model.
The model can be partially disassembled for easy transportation.
There are connectors on the wing and fuselage for quick and easy preparation of the model for flight.

The model is designed for both GoPro and other similar cameras. Good pictures are waiting for you.

Recommendations:

Flight Controller:
Matek F405 WTE
VMG:
Two motors 3008 1150 kv
Propellers 8040-3

Speed controls:
Exuav Lighting 70A Single ESC 2-6S

Servos:
JX Servo PDI-1109MG

GPS:
Cyclone M10

To build it, you will need:
- M2x10 screws
- Let's break the VTOL MPX 9+2
- M3x4.2x5.0 fused nuts
- Cyacrine with activator (Akfix 705)

To print the model, you will need:
- printer with a 250x250 desktop
- plastic Esun Pla+ (~ 1400g)

• Weight (kg) 1.8
• Wingspan 1500
• Video system DJI/Walksnail
• Battery 4-6s (6s2p18650 and more)
• Flight duration, minutes 60m (with 6s2p21700)
• Propeller size, inch 8-9
• Material esun pla+ / petg
• Сollapsible yes

• manual.pdf